Effect of MoS2/PTFE coatings on performance of Si3N4/TiC ceramics in dry sliding against WC/Co

To enhance the tribological performance of Si₃N₄/TiC ceramics, MoS₂/PTFE composite coatings were deposited on the ceramic substrate through spraying method. The micrographs and basic properties of the MoS₂/PTFE coated samples were investigated. Dry sliding friction experiments against WC/Co ball were performed with the coated ceramics and traditional ones. These results showed that the composite coatings could significantly reduce the friction coefficient of ceramics, and protect the substrate from adhesion wear. The primary tribological mechanisms of the coated ceramics were abrasive wear, coating spalling and delamination, and the tribological property was transited from slight wear to serious wear with the increase of load because of the lower surface hardness and shear strength. The possible mechanisms for the effects of MoS₂/PTFE composite coatings on the friction performance of ceramics were discussed.     

基于SRAM的通用存算一体架构平台在物联网中的应用

最近,存算一体(IMC)架构引起了广泛关注,并被认为有望成为突破冯诺依曼瓶颈的新型计算机架构,特别是在数据密集型(data-intensive)计算中能够带来显著的性能和功耗优势.其中,基于SRAM的IMC架构方案也被大量研究与应用.该文在一款基于SRAM的通用存算一体架构平台——DM-IMCA的基础上,探索IMC架构在物联网领域中的应用价值.具体来说,该文选取了物联网中包括信息安全、二值神经网络和图像处理在内的多个轻量级数据密集型应用,对算法进行分析或拆分,并将关键算法映射到DM-IMCA中的SRAM中,以达到加速应用计算的目的.实验结果显示,与基于传统冯诺依曼架构的基准系统相比,利用DM-IMCA来实现物联网中的轻量级计算密集型应用,可获得高达24倍的计算加速比.     

射线照相检测及质量评定虚拟仿真实验系统开发

在射线检测原理与方法的基础上,开发了一套基于计算机和信息技术的射线照相检测及质量评定虚拟仿真实验系统,可还原射线照相检测及质量评定的真实情境,直观反映射线照检测设备、工艺、人员和各环节的状态和参与过程,可以激发学生的学习兴趣与爱好,提高学生发现问题、分析问题和解决问题的能力.     

一种商用车MT变速箱简易推式分离机构设计

为了提升大型载货车、专用车用变速箱分离机构分离性能,满足大离合器盘分离需求,设计出一种分离机构.该机构通过机械原理实现放大输入端推力来满足离合器摩擦片分离.该分离机构结构简单、成本低廉,值得推广.     

平行坐标技术在干式变压器温度场可视化分析中的应用

本文中笔者将平行坐标技术应用于变压器温度场多维可视化分析,以矿用变压器为例,给出了其高、低压绕组纵向温度分布.     

The surface carboxyl group of carbonaceous microspheres effects on the synthesis and structure of SiOC ceramics

In this study, C/SiOC and C/SiO₂ composites were prepared by using carbonaceous microspheres with different surface functional groups. Carbonaceous microspheres based on hydrothermal reaction of glucose contains hydroxyl group, while the surface carboxyl group increases after NaOH etching. The hydroxyl group increases the oxygen-enriched structural units of SiOC ceramics, and the C spheres are closely enwrapped in SiOC matrix after pyrolysis at 900 °C. However, the interfacial reaction of surface carboxyl with Si–OH results in the formation of cristobalite SiO₂, and C spheres are not only encased inside the SiOC matrix, but also dispersed outside of SiOC ceramics. After removal of C via calcination at 500 °C for 5 h, C/SiOC and C/SiO₂ composites are transformed into amorphous SiO₂ and cristobalite SiO₂, respectively. The thermogravimetric analysis indicates the oxidation resistance of SiOC is superior to that of C and SiO₂.     

聚酯装置全消光转产特种消光过渡优化

总结了中国石化仪征化纤有限责任公司全消光转产特种消光切片的现状,根据理论计算反应釜中的TiO2含量随时间变化的公式,探索影响转产过渡时间的因素,为减少转产过渡时间,降低过渡料提供理论依据.     

企业内部控制与CFO行为主体独立性分析

文章分析和介绍了企业内部控制的重要意义以及CFO行为主体的独立性内涵,重点剖析了企业内部控制与CFO行为主体独立性之间的内在关联,在此基础上提出了强化CFO行为主体独立性、提高企业内部控制质量的建议,以期为企业发展战略的制定提供经验参考.     

负极添加NMP对电池性能的影响

锂离子电池负极浆料中添加N-甲基吡咯烷酮(NMP),在极片加热干燥时不能完全除去.残留的NMP吸附在石墨表面,使得SEI膜与石墨结合不牢固.研究了其对电池性能的影响,结果显示,在电池的循环过程中,SEI膜逐渐脱落,导致电池循环寿命缩短,但对电池的容量、内阻、倍率、存储等初期性能不影响.